DI 17 - Wedge
Compulsory figure from the series Dual-line individual figures.
Reference diagram
Official document: ISK Compulsories Book v3.0, p. 28
Official description
Judges will particularly consider
- Position within the Precision Grid
- Relative Placement of Components
- Speed control
- Turns
Explanation
The place where the kite is when the flyer calls out must be the same point where the first right angle was made.
Our reading
What follows is our reading of those documents, not an official document: the diagram and the description above are what counts.
Animation
Sequence
Doubts & discrepancies
Uncertain readings of the diagram or the official text, and disagreements between sources, to be validated. The animation follows the reading we chose, which is not an official interpretation.
No specific doubt or discrepancy about this figure.
Common to the whole family of figures
- douteOverall speed: we chose a constant speed of 15 units per second (about 4.4 m/s with 37 m lines), without any flight measurement. The ISK requires a constant speed (§II.V) without giving a value.
- douteKite size: our assumption is a wing 2.30 m wide, i.e. 8 grid units (1 unit ≈ 0.29 m with 37 m lines), with the proportions of the Hadzicki wing drawn in kite-physics; the dual-line wing has the same span. For the reference competition, we only found the scale of the grid (ISK §II.C: about 0.3 m for 38 m), not a kite size. At this size, the wings of a team overlap at times (MT 01, 02, 06 and 09). Lead: a smaller kite.
Keep going
In the series Dual-line individual figures
- DI 14 - Register
- DI 15 - LSI
- DI 16 - Two Squares and Stalls
- DI 17 - Wedge — you are here
- DI 18 - Square Cuts
- DI 19 - Launch, Circle, and Land 2P
- DI 20 - Boomerang
Last updated: