DP 12 - Pair Stops

Compulsory figure from the series Dual-line pair figures.

Reference diagram

DP 12 - Pair Stops

Official document: ISK Compulsories Book v3.0, p. 40

Official description

Judges will particularly consider

  • Stall
  • Speed control
  • Launch
  • Relative placement of components
  • Straight lines
  • Position within the precision grid

Explanation

  • 2 push stalls are executed on the vertical line.
  • 2 snap stalls are executed on the horizontal line.

Our reading

What follows is our reading of those documents, not an official document: the diagram and the description above are what counts.

Animation

Sequence

Doubts & discrepancies

Uncertain readings of the diagram or the official text, and disagreements between sources, to be validated. The animation follows the reading we chose, which is not an official interpretation.

No specific doubt or discrepancy about this figure.

Common to the whole family of figures

  • douteOverall speed: we chose a constant speed of 15 units per second (about 4.4 m/s with 37 m lines), without any flight measurement. The ISK requires a constant speed (§II.V) without giving a value.
  • douteKite size: our assumption is a wing 2.30 m wide, i.e. 8 grid units (1 unit ≈ 0.29 m with 37 m lines), with the proportions of the Hadzicki wing drawn in kite-physics; the dual-line wing has the same span. For the reference competition, we only found the scale of the grid (ISK §II.C: about 0.3 m for 38 m), not a kite size. At this size, the wings of a team overlap at times (MT 01, 02, 06 and 09). Lead: a smaller kite.

Keep going

In the series Dual-line pair figures

  1. DP 08 - Twist
  2. DP 09 - The Cliff
  3. DP 11 - Meet Again
  4. DP 12 - Pair Stops — you are here
  5. DP 14 - 2 Squares
  6. DP 15 - Thread and Roll
  7. DP 16 - Pair Square Cuts and Land

All 13 figures of the discipline

How to read ISK figures

Last updated: