DIN02 - Circle
Compulsory figure from the series Novice dual-line individual.
Reference diagram
Official document: FFVL novice figure book v1.0, p. 12
Official description
Description
The kite flies along a horizontal axis parallel to the ground. On reaching the center of the window, it flies a large circle (large diameter) and comes back to the circle’s entry point. It then resumes its horizontal line parallel to the ground (in the same alignment as before the circle).
Entry / Exit
The IN and OUT are given on either side of the window, at equal distance from its center (on which the circle is based).
Tips / Key elements
- The distance between the IN and the start of the circle, on the one hand, and between the end of the circle and the OUT, on the other, must be long enough for the judges to assess the straightness of the line and its parallelism to the ground.
Our reading
What follows is our reading of those documents, not an official document: the diagram and the description above are what counts.
Animation
Sequence
Doubts & discrepancies
Uncertain readings of the diagram or the official text, and disagreements between sources, to be validated. The animation follows the reading we chose, which is not an official interpretation.
No specific doubt or discrepancy about this figure.
Common to the whole family of figures
- douteOverall speed: we chose a constant speed of 15 units per second (about 4.4 m/s with 37 m lines), without any flight measurement. The ISK requires a constant speed (§II.V) without giving a value.
- douteKite size: our assumption is a wing 2.30 m wide, i.e. 8 grid units (1 unit ≈ 0.29 m with 37 m lines), with the proportions of the Hadzicki wing drawn in kite-physics; the dual-line wing has the same span. For the reference competition, we only found the scale of the grid (ISK §II.C: about 0.3 m for 38 m), not a kite size. At this size, the wings of a team overlap at times (MT 01, 02, 06 and 09). Lead: a smaller kite.
Keep going
In the series Novice dual-line individual
- DIN01 - Infinity
- DIN02 - Circle — you are here
- DIN03 - Square
- DIN04 - Test tube
- DIN05 - Octagon
- DIN06 - Rectangle
- DIN07 - Vertical eight
Last updated: